Filter/Service and Specialty Pressure Regulators

High flow and good filtration are critically important and the Fairchild Model 63 and slightly wider Model 65 filter service pressure regulators offer world class performance on both counts. In addition to standard products, Specialty Pressure Regulators, such as the Model 2400 standard, low, and high pressure series Motorized Regulators were developed by Fairchild for fast and convenient actuation and automation.

Showing 1–10 of 11 results

  • Model 63N NACE Pneumatic Filter Regulator (M63N)

    M63N
    New Fairchild model 63N NACE MRO175 compliant filter regulator is a service regulator for severe service conditions for sulfide stress crack resistant materials for oil field and associated equipment. This model offers an integral 5 micron filter within its drip well bowl and offers the highest flow capacity of any regulator in its class. In addition, the Model 63N NACE features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63N NACE will handle 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa and up to 25 SCFM, 42.5 m3/hr flow capacity. This model also has Canadian Registration (CRN) for all territories and provinces. Read More
  • Filter Service Regulators (M63)

    M63.rev1
    The Fairchild Model 63 filter regulator is a general purpose service regulator with an integral 5 micron filter within its dripwell bowl. In most applications, a pneumatic filter regulator must provide good filtration and high flow to serve the needs of the system without restricting its performance. The Model 63 pressure regulator is well suited to these applications as it has a standard 5 micron filter and has the highest flow capacity of any regulator in its class. In addition, the Model 63 features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63 will handle a 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa. The Fairchild Model 63 pressure regulator offers up to 25 SCFM, 42.5 m3/hr flow capacity. Read More
  • Service Regulator (M64)

    M64.rev1
    The Fairchild Model 64 service regulator is a general purpose regulator (does not have a filter). The Model 64 service regulator has wider port to port mounting dimensions (3.15", 80 mm) making it the choice for field replacement of older style Fairchild and competitive service regulators that have wider mounting port spacing. The Model 64 pneumatic regulator is similarly well suited to general purpose service regulator applications as it has the highest flow capacity of any regulator in its class. In addition, the Model 64 features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 64 will handle a 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa. The Fairchild Model 64 pressure regulator offers up to 25 SCFM, 42.5 m3/hr flow capacity. Read More
  • Filter Service Regulators (M65)

    M65.rev1
    The Fairchild Model 65 filter service pressure regulator is a general purpose service regulator with an integral 5 micron filter within its dripwell bowl. In most applications, a filter regulator must provide good filtration and high flow to serve the needs of the system without restricting its performance. The Model 65 service regulator has wider port to port mounting dimensions (3.15", 80 mm) making it the proper choice for field replacement of older style Fairchild and competitive service regulators that have wider mounting port spacing. The Model 65 is well suited to these applications as it has a standard 5 micron filter and has the highest flow capacity of any regulator in its class. In addition, the Model 65 filter service regulator features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 65 pneumatic regulator will handle a 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa. The Fairchild Model 65 pressure regulator offers up to 25 SCFM, 42.5 m3/hr flow capacity. Read More
  • Pneumatic Stainless Steel Service Regulator (M66)

    Back Pressure Regulators
    The Fairchild Model 66 is a stainless steel pressure regulator for high performance applications with corrosive environments and/or high temperatures. The Model 66 Stainless steel housing and internals, along with its fluorocarbon elastomers are compatible with a wide range of corrosive materials and difficult operating environments. The Fairchild Model 66 pneumatic regulator features control sensitivity of 1" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of system pressure changes or conditions. The Fairchild Model 66 pressure regulator will handle a 500 psi, 35 BAR maximum supply pressure and offers five (5) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa. Read More
  • Motorized Pressure Regulator (MP2400)

    2400 Series copy
    The 24CC, 24CS, 24XC and 24XS M/P Converters are motor driven pneumatic regulators with motor assemblies enclosed in a commercial enclosure, typically used as automation regulators. The AC Control Unit for the 24CC unit is a continuous operation motor available in 115vAC. The control assembly for the 24CS unit is a stepper motor with an integral Translator Board which converts 23-26vDC digital pulse inputs supplied by the customer, into control logic to drive the motor. The AC Control unit for the 24XC unit is a continuous operation motor available in 115vAC. A feedback potentiometer option is available for these units. The DC pulse input assembly for the 24 XS unit is a Clock Generator/Translator board available for the 12vDC or 24vDC pulse input. This allows the use of an external Controller with a 12vDC or 24vDC output. The DC analog input assembly is an Amplifier (Proportional Control) and Translator board which allows operation with a 4-20mA or 1-5vDC analog input. Minimum-maximum limit switches are standard on this unit. Reverse action and split ranging on the analog unit can be achieved in the field. The explosion proof motor and housing is coupled to a pneumatic regulator assembly to provide the desired operating pressure range for any application. The Fairchild MP2400 motorized regulator line will handle a 500 psi, 35 BAR maximum supply pressure and offers eleven (11) different set point pressure ranges from Vacuum-10 psi, vacuum-0.7 BAR, vacuum-70 kPa up to 2-100 psi, 0.15-7 BAR, 15-700 kPa. Read More
  • Low Pressure Motorized Pressure Regulator (MP2400)

    New 2400 Regulator
    The Model 2400 M/P Low Pressure Converter is also a motorized regulator, however, this unit uses a larger diaphragm regulator as its pressure control device to facilitate high accuracy set point control. The pneumatic control circuit is isolated from any explosive environment by enclosing the motor and associated electronics an explosion-proof housing. The Stepper Motor configuration is equipped with a clock generator positioned horizontally, which plugs into a vertically mounted translator board. The configuration includes limit switches. The Stepper Motor is mounted on the bottom of the motor assembly in the base of the explosion-proof housing. Wiring to the unit is made to a terminal board through a 1/2" - 14 NPT conduit fitting in the base of the housing. The large diaphragm regulator attaches to the motor housing and provides precision control in three (3) available pressure ranges, from 0-20 in water column, up to 0-5 psi. In these configurations, the MP2400Low Pressure motorized regulator will handle a supply pressure up to 150 psi, 10BAR, 1000 kPa. Read More
  • Plunger Operated Pressure Regulator (M2800)

    2800
    The Fairchild Model 2800 Plunger Regulator is designed for applications requiring linear mechanical actuation of set pressure. This precision device provides excellent sensitivity with high forward and reverse flows. The plunger design allows more rapid set point adjustment over the pressure range of the unit than conventional control knob models. The Model 2800 pneumatic plunger regulator is recommended for use in a variety of applications where mechanical actuation is required, including control stations and test panels, and in construction machinery and industrial or oil rig control equipment. The Fairchild Model 2800 features control sensitivity of 0.5" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of system pressure changes or conditions. The Model 2800 pressure regulator will handle a 250 psi, 17 BAR maximum supply pressure and offers four (4) set point pressure ranges from 0.5-10 psi, 0.03-0.7 BAR, 3-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa. Read More
  • Lever Operated Pressure Regulator (M3400)

    3400
    The Fairchild Model 3400 Lever Operated pressure Regulator is designed to allow rapid changes in pressure settings at control stations and test panels. This high quality unit, capable of handling high flows and exhausts combines positive control with good sensitivity. The Model 3400 Pneumatic Lever Operated Regulator is the combination of a Model 1000 High Flow Pressure Regulator and a hand held operated lever mechanism with 120 degree maximum travel. The Model 3400, offered in four (4) different pressure ranges, is recommended for use in systems requiring the execution of hand operated pressure control such as the control of a throttle in an engine or engine room. The regulator is the logical choice for rapid, "hands on" control in a variety of applications, including construction machinery, industrial and oil rig equipment, and cylinder operation. Read More
  • Motorized High Pressure Regulator (24XFM)

    24XFM_NEW Image
    The 24XFM M/P Converter is a Motor Driven Pneumatic Regulator with motor assembly enclosed in a explosion proof housing. The motor is coupled to a no-bleed Model 10 pneumatic regulator assembly to provide the desired operating pressure range for any application. The 24XFM requires a 12-24 VDC power supply and has the option of DC Pulse or DC Analog input. The Fairchild 24XFM motorized regulator line will handle a 500 psi, 35 BAR maximum supply pressure and offers four (4) different set point pressure ranges from 0-30 psig [0-2 bar], to 0-150 psig [0-10 bar]. Read More