All of our accessories complement our complete line of control products. Transducer manifold and rack mounting kits, pressure gages, strip pressure gages, panel loading stations, calibrators, automatic drain filters, and natural gas filters offer high quality and precision typical of all Fairchild products.

  • Brackets, Gauges & Ball Valves (Modular Ball Valves and Accessories)

    Take full advantage of your compressed gas system by adding a modular ball shutoff valve. A ball shutoff valve is essential for quick turn around of maintenance and replacement of in-line system components. Save time and money onn the cost of repairs of system components with Fairchild's new modular ball valves. The lockout feature of Fairchild's new ball valves provide a sage and more fluid work environment. Fairchild's new modular ball shutoff valves are rugged with extreme high flow capacity and quality construction. Port sizes from 1/4" to 3/4" with flow capacities ranging from 42 SCFM to 678 SCFM. Also available are a full line of brackets and gauge accessories to complete your air preparation package.
    Read more
  • Particulate Filters (F Series)

    Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new Particulate Filters provide the clean, dry, lubricated air essential for optimum performance of pneumatic systems. With their modular construction, the particulate filters provides compact efficiency, high flow, and superior 5 micron filtration.
    Read more
  • Filter Regulator (FR)

    Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new FR preparation package provides the clean, dry air essential for optimum performance of pneumatic systems. With their modular construction, the FR unit provides compact efficiency, high flow, and superior 5 micron filtration. Output pressures up to 125 psig and flow to 175 SCFM.
    Read more
  • Coalescing Filters (D Series)

    Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new Coalescing Filters provide the clean, dry, lubricated air essential for optimum performance of pneumatic systems. With their modular construction, the coalescing filters provides compact efficiency, high flow, and superior 0.5, 0.01, or 0.003 micron filtration.
    Read more
  • Automatic Drain Filters

    The Fairchild Automatic Drain Filter Series is designed for use in systems that require clean, oil-free air. This series consists of a particulate filter and two coalescing filters with automatic drains. You can easily replace all filter elements. Automatic Drain Filters are highly effective in removing oil and liquid-borne particulate matter. These units are recommended for use when clean air or inert gas environments are required in laboratory air, process control, instrument and compressed air systems.
    Read more
  • Mini Strip and Round Pressure Gages

    Mini Strip Gages are designed for use in small panel mount applications. Both gage styles include a receiver gage configuration designed for the pneumatic transmission of process variables.
    Read more
  • Mini-Panel Loading Stations

    Models MPL-70 and MPLT-70 Mini-panel Loading Stations transmit and monitor a pressure signal for pneumatic instrumentation. These loading stations are ideally suited for applications with limited space. The Model MPL-70 includes a Model 70B Pneumatic Subminiature Regulator and a mini-strip gage to set and read pressure at the panel. The MPLT-70, with the Transfer Function, includes a Model 70B Pneumatic Subminiature Regulator, an automatic or manual switch, and an additional mini-strip gage to monitor the process in automatic mode or change pressure settings in manual mode. Turn the adjusting knob in the loading station panel in a clockwise direction to increase output pressure or in a counterclockwise direction to decrease output pressure.
    Read more
  • Panel Loading Station

    Models PL-5 and PLT-8 Panel Loading Stations maintain and monitor output pressure for pneumatic instrumentation. The PL-5 includes a regulator (Model 10, Model 30, Model 64/65A, or Model 81) and a standard pressure gage that allows operator to set and read pressure at the panel. The PLT-8 includes a regulator (Model 10, Model 30, or Model 64A/65A) and a three-way valve that allows operator to monitor the process in manual or automatic mode. In manual mode, operator can set and read the pressure at the panel. In automatic mode, operator can set the pressure from a remote location and read the pressure at the panel.
    Read more
  • Rack Kits for T6000, T7800 and T8000 Transducers

    All T6000, T7800 and T8000 Rack Kits utilize a 10 unit manifold described in the above manifold kits. The rack kit includes additional hardware to permit installation in a standard 19" Rack. It is suggested that transducers used with rack kits include the "R" option. This option faces the electrical terminal block connector to the rear of the transducer permitting connections to the transducer to be made from the rear of the rack.
    Read more
  • Manifold Kits for T6000, T7800 and T7950 Transducers Current to Pneumatic (I/P or E/P)

    The Manifold Kits for the T6000, T7800 and T7950 Series Transducers are available for mounting 3, 5, 10 or 15 transducer units. These manifolds have a common supply port to all the transducers. Internal check valves in the inlet and outlet ports permit the installation and removal of individual transducers without affecting other units on the manifold. Supply port connections are provided on the end and rear of the manifold. Outlet ports are located on the rear and bottom of the manifold. Mounting brackets for flush or extended mounting from the back wall are available. These options allow the user to select the combination of supply ports, outlet ports and mounting configurations to maximize usage of available space.
    Read more
  • Manifold Kits for T8000 Series Transducers Pneumatic to Current (P/I)

    Manifold kits for the T8000 Series Transducers are also available for mounting 3, 5, 10 or 15 transducer units. All input ports on the manifold have internal check valves to seal off the input signal(s) if a transducer is removed from the manifold. Since each housing may contain two individual P/I transducers, the quantity of P/I's on the manifold has the capability of doubling. Rear and bottom input port connections and flush or extended mounting brackets allow the user to configure the manifold to maximize the use of available space.
    Read more