Low Pressure Precision Pressure Regulator (M4100A)

Related products

• High Flow No Bleed Precision Pressure Regulator (M4000A)

  The Fairchild Model 4000A is a no bleed high flow precision pressure regulator designed for applications that require high performance, very low consumption and accurate process control. The Model 4000A pneumatic regulator features control sensitivity of less than 0.5" water column, minimal consumption and high flow capacity to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 4000A pressure regulator will handle a 250 psi, 17 BAR maximum supply pressure and offers five (5) output pressure ranges from 0.5-10 psi, 0.03-0.7 BAR, 3-70 kPa up to 5-250 psi, 0.35-17 BAR, 35-1700 kPa. The Model 4000A has a flow capacity of up to 150 SCFM, 255 m3/hr.
  Read more

• PAX1 Electric Linear Actuator

  Rotork Fairchild's all new PAX1 Series Linear Actuator can be used alone or it can be paired with a variety of Fairchild time proven pressure regulators, enabling remote control of the pneumatic pressure. Power is provided by 11-26 VDC and position is controlled by a 4-20mA signal or pulse clockwise or counterclockwise. The actuator is designed to lock in last place if power or signal are lost. The PAX1 is ideal when precise position control is required, and it has an optional analog feedback that transmits current position to the operator through an 4 to 20 mA Analog Feedback Signal. Adjustable motor speeds, customer set position limits and alarms are standard features.

  • The PAX 1is available in a variety of configurations and NAMUR mounting interface allow it to be flexible for use as an industrial actuator, featuring a 1" (25 mm) maximum thrust rod stroke moving at speeds up to 60 mm/min and a maximum thrust of 650 lbf (2,890 N), all in a flameproof enclosure. The unit in inherently lock in last place (fail freeze) as the thrust rod maintains its position upon loss of signal or electrical power.
  • The PAX1 can be actuated open loop using two optically isolated switch closure inputs (UP and Down) to move the actuator's thrust rod. The actuator will continue the move of the thrust rod in response to the inputs until either either of the adjustable stroke limits are reached.
  • The PAX 1 also has an isolated 4-20 mA analog input to proportionally position the thrust rod anywhere within its 1" (25 mm) stroke. Optionally, a 1-5 VDC non-isolated analog input can be selected by an internal DIP switch.
  • The actuator also includes two fully adjustable SPDT alarm relays (one High and one Low), providing critical positions within its stroke. The relays are latched so the alarm switch states are maintained when the power is disconnected.
  • The actuator also features UP and DOWN buttons and a 5/16" (8 mm) female HEX socket to allow manual actuator movement, in order to facilitate commissioning.

  All these features are allows accurate control and alarm functions on systems that remove power from the actuator between adjustments to conserve power, as typically done in solar powered installations.
  Read more

• Motorized High Pressure Regulator (24XFM)

  The 24XFM M/P Converter is a Motor Driven Pneumatic Regulator with motor assembly enclosed in a explosion proof housing. The motor is coupled to a no-bleed Model 10 pneumatic regulator assembly to provide the desired operating pressure range for any application. The 24XFM requires a 12-24 VDC power supply and has the option of DC Pulse or DC Analog input. The Fairchild 24XFM motorized regulator line will handle a 500 psi, 35 BAR maximum supply pressure and offers four (4) different set point pressure ranges from 0-30 psig [0-2 bar], to 0-150 psig [0-10 bar].
  Read more

• Motorized Pressure Regulator (MP2400)

  The 24CC, 24CS, 24XC and 24XS M/P Converters are motor driven pneumatic regulators with motor assemblies enclosed in a commercial enclosure, typically used as automation regulators. The AC Control Unit for the 24CC unit is a continuous operation motor available in 115vAC. The control assembly for the 24CS unit is a stepper motor with an integral Translator Board which converts 23-26vDC digital pulse inputs supplied by the customer, into control logic to drive the motor. The AC Control unit for the 24XC unit is a continuous operation motor available in 115vAC. A feedback potentiometer option is available for these units. The DC pulse input assembly for the 24 XS unit is a Clock Generator/Translator board available for the 12vDC or 24vDC pulse input. This allows the use of an external Controller with a 12vDC or 24vDC output. The DC analog input assembly is an Amplifier (Proportional Control) and Translator board which allows operation with a 4-20mA or 1-5vDC analog input. Minimum-maximum limit switches are standard on this unit. Reverse action and split ranging on the analog unit can be achieved in the field. The explosion proof motor and housing is coupled to a pneumatic regulator assembly to provide the desired operating pressure range for any application. The Fairchild MP2400 motorized regulator line will handle a 500 psi, 35 BAR maximum supply pressure and offers eleven (11) different set point pressure ranges from Vacuum-10 psi, vacuum-0.7 BAR, vacuum-70 kPa up to 2-100 psi, 0.15-7 BAR, 15-700 kPa.
  Read more

• Precision Back Pressure Regulator (M10BP)

  The Rotork Fairchild Model 10BP Regulator is an excellent choice for applications which require high precision control of back pressures and relief pressures. The Model 10BP uses a force balance principle to open the relief valve and vent the system pressure when the set point is exceeded. The Model 10BP features control sensitivity of 1/8" water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Model 10BP pneumatic regulator is a high capacity regulator that provides greater accuracy than relief valves over a narrow pressure range, making it an excellent choice for a wide range of precision applications. The Fairchild Model 10BP will handle a 500 psi, 34 BAR, maximum system pressure and offers nine (9) setpoint pressure ranges from 0-2 psi, 0-0.15 BAR, 0-15 kPa, up to 5-400 psi, 0.3-28 BAR, 35-2800 kPa. The Fairchild Model 10BP back pressure regulator offers 40 SCFM, 68m3/hr flow capacity.
  Read more

• High Pressure Regulator (HPH) – 10,000 psig

  Rotork Fairchild’s High Pressure Hydraulic - Pressure Reducing Regulator is suitable for 10,000 psig / 690 bar inlet and outlet hydraulic and pneumatic applications. Tapped exhaust port allows for convenient capture of vented media. Age hardened stainless steel allow seat (MP35N) provides a unique combination of ultra high strength, toughness and outstanding corrosion resistance. Zirconia oxide ceramic ball provides high strength and excellent wear resistance to provide reliable, long-lasting unit even the most harsh applications.
  Read more

• Low Pressure Motorized Pressure Regulator (MP2400)

  The Model 2400 M/P Low Pressure Converter is also a motorized regulator, however, this unit uses a larger diaphragm regulator as its pressure control device to facilitate high accuracy set point control. The pneumatic control circuit is isolated from any explosive environment by enclosing the motor and associated electronics an explosion-proof housing. The Stepper Motor configuration is equipped with a clock generator positioned horizontally, which plugs into a vertically mounted translator board. The configuration includes limit switches. The Stepper Motor is mounted on the bottom of the motor assembly in the base of the explosion-proof housing. Wiring to the unit is made to a terminal board through a 1/2" - 14 NPT conduit fitting in the base of the housing. The large diaphragm regulator attaches to the motor housing and provides precision control in three (3) available pressure ranges, from 0-20 in water column, up to 0-5 psi. In these configurations, the MP2400Low Pressure motorized regulator will handle a supply pressure up to 150 psi, 10BAR, 1000 kPa.
  Read more

• High Flow Precision Pressure Regulator (M100)

  The Fairchild Model 100 is a high flow precision pressure regulator designed for applications that require high performance, large volume flow and accurate process control. Like many of the Fairchild precision regulators, the compensating action of the inner valve assembly of the Model 100 allows complete stabilization of downstream pressure. The Fairchild Model 100 features control sensitivity of less than 1" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Model 100 pneumatic regulator is capable of providing precise control of set point and good sensitivity under high flow conditions, and is the ideal choice for many demanding applications, including main header regulator control, large nip roll loading, and clutch brake operation. The Fairchild Model 100 pressure regulator will handle a 250 psi, 17 BAR maximum supply pressure and offers five (5) output pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-150 psi, 0.14-10 BAR, 14-1000 kPa. The Model 100 has a flow capacity of 1500 SCFM, 2550 m3/hr.
  Read more