Moisture Resistant I/P Pressure Transducers (TXI7850)

Related products

• Explosion Proof Moisture Resistant I/P Pressure Transducers (TXI7850)

  Fairchild's TXI7850 operates under the same basic principles as the TXI7800, yet improves upon the design. By encapsulating and otherwise protecting the critical components, Fairchild designed the Explosion proof TXI7850 I/P transducer to be highly resistant to moisture within the supply air lines. Available in both standard and extended range configurations, the TXI7850 delivers vibration, shock and moisture resistance in output pressures up to 0-120 psi [0-8.0 BAR], (0-800 kPa). It carries full Agency Approvals, including FM, CSA and ATEX certifications. I/P Pressure Transducer, I/P Pressure converter.
  Read more

• Lock in Place I/P Pressure Transducers (T6100)

  Uniquely designed by Fairchild, the T6100 "Lock in Last Place" I/P pressure transducer provides flexibility, reliability and safety in applications requiring protection from signal failures to critical control system instruments. Its simple yet effective voice coil actuation now Locks in "Last Position" to accurately capture the setpoint with extremely low drift after a power loss permits the T6100 to maintain set point. The unit's IP65 rating allows you to handle moist applications with ease. Design of the T6100 relies on a proprietary integrated solenoid valve module interposed between the flapper-nozzle pilot and the booster section. Upon signal failure, an electrical charge stored within the active electronic circuit controlling the integrated solenoid valve module maintains the current to the voice coil at its last setpoint. Simultaneously, a high energy pulse closes the solenoid valve, trapping the signal pressure within the signal chamber at the last setpoint. The booster continues to provide its normal forward and exhaust flow, with the constant signal pressure now captured and maintained within the signal chamber. Advanced valve orifice design of the T6100 increases its forward flow capacity to a minimum of 5-scfm at 21-psig supply pressure.
  Read more

• Compact E/P, I/P Low Pressure Transducers (T7500)

  The T7500 series low pressure transducer converts DC electronic input signal to a proportional low pressure pneumatic output. The transducer employs electronic closed loop feedback in conjunction with a piezoceramic actuator flapper nozzle system in the pilot stage to control the signal pressure of an integral pneumatic volume booster. The volume booster employs a highly sensitive control diaphragm and main valve to accurately control the flow of air to the downstream system in response to the pressure received from the pilot stage. The electronic closed loop feedback senses the output pressure of the volume booster directly to affect the ultimate in accurate pressure control.

   
  Read more

• Compact E/P, I/P Pressure Transducers (T7800)

  High performance at economical process is available from the Fairchild T7800 series of piezo-ceramic actuated I/P transducer. These units offer state of the art accuracy up to 0.15% FS. The disc actuation mechanism provides a product that is totally impervious to shock, vibration and positional orientation. In the Extended Range units, an additional Relay Section amplifies the output pressure to obtain up to 0-120 psi [0-8.0 BAR], (0-800 kPa) output. The T7800 series is approved for Intrinsic Safety and Non-Incendive use carries FM, CSA, ATEX and IECEx approvals.
  Read more

• Fast Response High Flow E/P, I/P Pressure Transducers (T5220)

  As a Fast Response High Flow I/P, E/P Transducer, the Fairchild T5220 has all the performance you want in a voice coil I/P transducer product, but it also includes a built in booster section to deliver high flow capacity, up to 45 SCFM (76.5 m3/HR) with six available rations to allow pressure multiplication to the output. This feature, along with the adjustable positive and negative bias allows you to custom design your control system for exactly the desired performance. The Signal Conversion Section (PC Board) accepts a DC current or voltage. This signal is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force transferred to the Flexure Arm by the Coil. The Booster Section amplifies the output pressure of the transducer.
  Read more

• Explosion Proof I/P Pressure Transducers (TXI7800)

  Designed for use in hazardous environments, the Fairchild TXI7800 series product is an explosion proof I/P pressure transducer. It operates under the same principles as the T7800 product; however the TXI series includes NEMA 4X explosion proof construction. Our design isolates the electronics chamber from the pneumatic section, thereby creating a safer and longer service life product, especially for applications handling natural gas. In the Extended Range units, the TXI7800 series will also deliver up to 0-120 psi [0-8.0 BAR], (0-800 kPa) output. The TXI7800 series is approved for hazardous use and carries FM. CSA, ATEX and IECEx approvals.
  Read more

• Fast Response E/P, I/P Pressure Transducers (T5200)

  Rotork Fairchild's T5200 Transducer is a Fast Response I/P, E/P Transducer controlled by a 4-20 mA current in a control loop. With its reliable signal conversion and pneumatic circuit sections, the T5200 I/P Transducer provides fast response to input signal changes, resulting in faster loop control and savings in process materials. The Signal Conversion Section (PC Board) accepts a 4-20 mA current from the control loop. This signal current is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force of the Flexure Arm. Its minimal air consumption allows you to use the T5200 in systems where operating gas is expensive. Five available input signal ranges deliver the versatility to meet most process and machine requirements. These available inputs are 1-5 mA, 4-20 mA, 10-50 mA, 1-5 VDC and 1-9 VDC, each with the corresponding output range of 3-15 psig, [0.2-1.0 BAR], (20-100 kPa).
  Read more

• Voice Coil EP, E/P, I/P Pressure Transducers (TXPD6000)

  The TXPD6000 I/P transducer is a field reversible unit that provides an output directly or inversely proportional to the input signal. Its six available output pressure ranges and six available input signal ranges meet most process and machine requirements. The TXPD6000 Series is designed for precision applications providing maximum versatility. In this explosion proof NEMA 4X configuration, the TXPD6000 is approved by FM, CSA and ATEX and ready for your installation in hazardous duty.
  Read more