Precision Stainless Steel Fuel Control Regulator (M67)

Features High Accuracy Extremely Low Droop Under Flow Full Corrosion Resistance for All Fuels and Mixtures No Supply Pressure Effect Allows Quick Fuel Changeover Washdown and Internal Purge Capability	Benefits Tough and Durable Designed for versatile testing applications Balanced valve design for high precision control Compensates downstream pressure droop under flow conditions Switch between different fuels quickly and easily

The directly-controlled Model 67 stainless steel regulator precisely controls fuel pressures in ranges from minus 6 to 60 psi. The large diaphragm actuator with directlycontrolled valve gives excellent response characteristics with very low hysteresis. High precision control is achieved by its forcebalanced valve, with a newly developed patented smooth running seal system. Specially developed for the high precision and reliability requirements of modern engine test equipment, the M67 is suitable for all fuels such as gasoline, diesel, biodiesel (RME), aviation fuel, methanol,ethanol, petrol mixtures E5 to E100 and diesel mixtures B5 to B100.

Related products

Model 63N NACE Pneumatic Filter Regulator (M63N)
New Fairchild model 63N NACE MRO175 compliant filter regulator is a service regulator for severe service conditions for sulfide stress crack resistant materials for oil field and associated equipment. This model offers an integral 5 micron filter within its drip well bowl and offers the highest flow capacity of any regulator in its class. In addition, the Model 63N NACE features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63N NACE will handle 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa and up to 25 SCFM, 42.5 m3/hr flow capacity. This model also has Canadian Registration (CRN) for all territories and provinces.
Read more
Pneumatic Stainless Steel Service Regulator (M66)
The Fairchild Model 66 is a stainless steel pressure regulator for high performance applications with corrosive environments and/or high temperatures. The Model 66 Stainless steel housing and internals, along with its fluorocarbon elastomers are compatible with a wide range of corrosive materials and difficult operating environments. The Fairchild Model 66 pneumatic regulator features control sensitivity of 1" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of system pressure changes or conditions. The Fairchild Model 66 pressure regulator will handle a 500 psi, 35 BAR maximum supply pressure and offers five (5) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa.
Read more
Filter Regulators C, D, and F Series (FR)
Take full advantage of compressed gases on pneumatic systems. The gas must be adequately prepared. Fairchild's FR preparation package provides the clean, dry air essential for optimum performance of pneumatic systems. With their modular construction, the FR units provide compact efficiency, high flow, and superior 5 micron filtration.
Read more
M63N NRO175 compliant filter regulator
New Fairchild model 63N NACE NRO175 compliant filter regulator is a service regulator for severe service conditions for sulfide stress crack resistant materials for oil field and associated equipment. This model offers an integral 5-micron filter within its drip well bowl and offers the highest flow capacity of any regulator in its class. In addition, the Model 63N NACE features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain the desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63N NACE will handle 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa and up to 25 SCFM, 42.5 m3/hr flow capacity. This model also has a Canadian Registration (CRN) for all territories and provinces.
Read more
Particulate Filters (F Series)
Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new Particulate Filters provide the clean, dry, lubricated air essential for optimum performance of pneumatic systems. With their modular construction, the particulate filters provides compact efficiency, high flow, and superior 5 micron filtration.
Read more
Filter Service Regulators (M63)
The Fairchild Model 63 filter regulator is a general purpose service regulator with an integral 5 micron filter within its dripwell bowl. In most applications, a pneumatic filter regulator must provide good filtration and high flow to serve the needs of the system without restricting its performance. The Model 63 pressure regulator is well suited to these applications as it has a standard 5 micron filter and has the highest flow capacity of any regulator in its class. In addition, the Model 63 features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63 will handle a 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa. The Fairchild Model 63 pressure regulator offers up to 25 SCFM, 42.5 m3/hr flow capacity.
Read more
Filter Regulator (FR)
Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new FR preparation package provides the clean, dry air essential for optimum performance of pneumatic systems. With their modular construction, the FR unit provides compact efficiency, high flow, and superior 5 micron filtration. Output pressures up to 125 psig and flow to 175 SCFM.
Read more
Low Pressure Motorized Pressure Regulator (MP2400)
The Model 2400 M/P Low Pressure Converter is also a motorized regulator, however, this unit uses a larger diaphragm regulator as its pressure control device to facilitate high accuracy set point control. The pneumatic control circuit is isolated from any explosive environment by enclosing the motor and associated electronics an explosion-proof housing. The Stepper Motor configuration is equipped with a clock generator positioned horizontally, which plugs into a vertically mounted translator board. The configuration includes limit switches. The Stepper Motor is mounted on the bottom of the motor assembly in the base of the explosion-proof housing. Wiring to the unit is made to a terminal board through a 1/2" - 14 NPT conduit fitting in the base of the housing. The large diaphragm regulator attaches to the motor housing and provides precision control in three (3) available pressure ranges, from 0-20 in water column, up to 0-5 psi. In these configurations, the MP2400Low Pressure motorized regulator will handle a supply pressure up to 150 psi, 10BAR, 1000 kPa.
Read more