Click Here to See Our Newest Electro-Pneumatic Transducers
Rack Kits for T6000, T7800 and T8000 Transducers
All T6000, T7800 and T8000 Rack Kits utilize a 10 unit manifold described in the above manifold kits. The rack kit includes additional hardware to permit installation in a standard 19" Rack. It is suggested that transducers used with rack kits include the "R" option. This option faces the electrical terminal block connector to the rear of the transducer permitting connections to the transducer to be made from the rear of the rack.
Moisture Resistant I/P Pressure Transducers (TXI7850)Fairchild's TXI7850 I/P Pressure Transducer operates under the same basic principles as the TXI7800, yet improves upon the design. By encapsulating and otherwise protecting the critical components, Fairchild designed the Explosion proof TXI7850 I/P Pressure Transducer to be highly resistant to moisture within the supply air lines. Available in both standard and extended range configurations, the TXI7850 delivers vibration, shock and moisture resistance in output pressures up to 0-120 psi [0-8.0 BAR], (0-800 kPa). It carries full Agency Approvals, including FM, CSA and ATEX certifications.
Explosion Proof I/P Pressure Transducers (TXI7800)Designed for use in hazardous environments, the Fairchild TXI7800 series product is an explosion proof I/P pressure transducer. It operates under the same principles as the T7800 product; however the TXI series includes NEMA 4X explosion proof construction. Our design isolates the electronics chamber from the pneumatic section, thereby creating a safer and longer service life product, especially for applications handling natural gas. In the Extended Range units, the TXI7800 series will also deliver up to 0-120 psi [0-8.0 BAR], (0-800 kPa) output. The TXI7800 series is approved for hazardous use and carries FM. CSA, ATEX and IECEx approvals.
Compact E/P, I/P Pressure Transducers (T7800)High performance at economical process is available from the Fairchild T7800 series of piezo-ceramic actuated I/P transducer. These units offer state of the art accuracy up to 0.15% FS. The disc actuation mechanism provides a product that is totally impervious to shock, vibration and positional orientation. In the Extended Range units, an additional Relay Section amplifies the output pressure to obtain up to 0-120 psi [0-8.0 BAR], (0-800 kPa) output. The T7800 series is approved for Intrinsic Safety and Non-Incendive use carries FM, CSA, ATEX and IECEx approvals.
Voice Coil EP, E/P, I/P Pressure Transducers (TXPD6000)The TXPD6000 I/P transducer is a field reversible unit that provides an output directly or inversely proportional to the input signal. Its six available output pressure ranges and six available input signal ranges meet most process and machine requirements. The TXPD6000 Series is designed for precision applications providing maximum versatility. In this explosion proof NEMA 4X configuration, the TXPD6000 is approved by FM, CSA and ATEX and ready for your installation in hazardous duty.
Manifold Kits for T6000, T7800 and T7950 Transducers Current to Pneumatic (I/P or E/P)The Manifold Kits for the T6000, T7800 and T7950 Series Transducers are available for mounting 3, 5, 10 or 15 transducer units. These manifolds have a common supply port to all the transducers. Internal check valves in the inlet and outlet ports permit the installation and removal of individual transducers without affecting other units on the manifold. Supply port connections are provided on the end and rear of the manifold. Outlet ports are located on the rear and bottom of the manifold. Mounting brackets for flush or extended mounting from the back wall are available. These options allow the user to select the combination of supply ports, outlet ports and mounting configurations to maximize usage of available space.
Fast Response High Flow E/P, I/P Pressure Transducers (T5220)As a Fast Response High Flow I/P, E/P Transducer, the Fairchild T5220 has all the performance you want in a voice coil I/P transducer product, but it also includes a built in booster section to deliver high flow capacity, up to 45 SCFM (76.5 m3/HR) with six available rations to allow pressure multiplication to the output. This feature, along with the adjustable positive and negative bias allows you to custom design your control system for exactly the desired performance. The Signal Conversion Section (PC Board) accepts a DC current or voltage. This signal is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force transferred to the Flexure Arm by the Coil. The Booster Section amplifies the output pressure of the transducer.
Electro-Pneumatic Pressure Controller (T9000)The Fairchild T9000 Series Electro-Pneumatic Pressure Controller has a closed-loop, integrated, microprocessor control system that regulates outlet pressure. The Model T9000 controls pressure in proportion to an analog electrical input signal. An internal feedback sensor monitors output pressure to achieve high accuracy. You can control the output from the Model T9000 using the keypad or from an analog control signal. You can control the output from the Model T9000D using the keypad and through DeviceNet™ Communication network. With its integral booster sections, the T9000 series of I/P pressure controllers delivers high accuracy at flow capacities of 1 SCFM in the T9000, 90 SCFM in the T9020, 110 SCFM in the T9040, 220 SCFM in the T9060, and 700 SCFM in the T9080.
Explosion Proof Moisture Resistant I/P Pressure Transducers (TXI7850)Fairchild's TXI7850 operates under the same basic principles as the TXI7800, yet improves upon the design. By encapsulating and otherwise protecting the critical components, Fairchild designed the Explosion proof TXI7850 I/P transducer to be highly resistant to moisture within the supply air lines. Available in both standard and extended range configurations, the TXI7850 delivers vibration, shock and moisture resistance in output pressures up to 0-120 psi [0-8.0 BAR], (0-800 kPa). It carries full Agency Approvals, including FM, CSA and ATEX certifications. I/P Pressure Transducer, I/P Pressure converter.