Shop

Showing 1–24 of 88 results

  • Legacy Products (Obsolete)

    Legacy Products (Obsolete)
  • Linear Actuators

    Linear Actuators
  • Filters and Accessories

    Filters and Accessories
    All of our accessories complement our complete line of control products. Transducer manifold and rack mounting kits, pressure gages, strip pressure gages, panel loading stations, calibrators, automatic drain filters, and natural gas filters offer high quality and precision typical of all Fairchild products.
  • Manifold and Rack Kits

    Manifold and Rack Kits
    Manifold Kits for the T6000, T7800 and T7950 Series Transducers are available for mounting 3, 5, 10 or 15 transducer units. These manifolds have a common supply port to all the transducers. Supply port connections are provided on the end and rear of the manifold. Outlet ports are located on the rear and bottom of the manifold. All T6000, T7800 and T8000 Rack Kits utilize a 10 unit manifold and include additional hardware to permit installation in a standard 19" Rack.
  • Panel Loading Station

    Panel Loading Station
    Models PL-5 and PLT-8 Panel Loading Stations maintain and monitor output pressure for pneumatic instrumentation. The PL-5 includes a regulator (Model 10, Model 30, Model 64/65, or Model 81) and a standard pressure gage that allows operator to set and read pressure at the panel. The PLT-8 includes a regulator (Model 10, Model 30, or Model 64A/65A) and a three-way valve that allows operator to monitor the process in manual or automatic mode.
  • Pneumatic Volume Boosters

    Pneumatic Volume Boosters
    Pneumatic volume boosters feature high flow capacity and fast response. A wide range of signal to output pressure ratios, pipe sizes and options are available in Fairchild's pilot operated regulator booster products with a Cv of 1 up to a Cv of 18, with flow capacities of 45 SCFM, 76.5 m3/hr up to 1500 SCFM, 2550 m3/hr.
  • Relays

    Relays
    Our extensive line of pneumatic relays serves a multitude of control applications: positive biasing relays, positive and negative biasing relays, infinitely adjustable ratio relays, reversing relays, averaging and computing relays, high and low pressure selectors, and high and low pressure limiting relays.
  • Electro-Pneumatic Transducers

    Electro-Pneumatic Transducers
    Accurate, compact I/P, E/P, D/P & P/I electro-pneumatic transducers with extensive combinations of inputs and outputs carry standard FM, CSA, ATEX or IECEx agency approvals and maintain accuracies up to 0.15%. Fast response transducers, high flow transducers and high accuracy transducers developed by Fairchild feature proportional pressure regulation.
  • Pressure Regulators

    Pressure Regulators
    Fairchild's wide selection of Regulators satisfies your instrument control applications and industrial control needs. A wide range of Pneumatic regulators including precision pressure regulators, back pressure regulators, miniature regulators, filter service regulators, stainless steel regulators, motorized regulators, low-pressure regulators and specialty regulators.
  • High Precision Pressure Regulators

    High Precision Pressure Regulators
    The Fairchild Models 10 and 81 are ideal for general precision pressure regulator applications, while the compact Models 30 and 80 offer high precision in a small package. The Model 100 high flow regulator, the 1000 no bleed pressure regulator, the 4000A no bleed high flow regulator and the Model 4100A Low Pressure regulator also offer high precision control
  • Filter/Service and Specialty Pressure Regulators

    Filter/Service and Specialty Pressure Regulators
    High flow and good filtration are critically important and the Fairchild Model 63 and slightly wider Model 65 filter service pressure regulators offer world class performance on both counts. In addition to standard products, Specialty Pressure Regulators, such as the Model 2400 standard, low, and high pressure series Motorized Regulators were developed by Fairchild for fast and convenient actuation and automation.
  • Filter Regulators C, D, and F Series (FR)

    Take full advantage of compressed gases on pneumatic systems. The gas must be adequately prepared. Fairchild's FR preparation package provides the clean, dry air essential for optimum performance of pneumatic systems. With their modular construction, the FR units provide compact efficiency, high flow, and superior 5 micron filtration.
    Read more
  • High Flow Microprocessor EP, I/P Pressure Transducers (T7900)

    The Fairchild T7900 Series Electro-Pneumatic Transducers have a closed-loop, integrated, microprocessor control system that regulates outlet pressure. The Model T7900 controls pressure in proportion to an analog electrical input signal. An internal feedback sensor monitors output pressure to achieve high accuracy. You can control the output from the Model T7900 using the keypad or from an analog control signal. You can control the output from the Model T7900D using the keypad and through DeviceNet™ Communication network. With its integral booster section, the T7900 delivers high accuracy at its high flow capacity of 100 SCFM (170 m3/HR)
    Read more
  • High Flow, High Pressure E/P, I/P Pressure Transducers (T1750)

    Fairchild's new T1750 I/P, E/P pressure transducer delivers high performance in terns of its high accuracy, high pressure, high flow and fast response. It operates with the same pinpoint accuracy from 15 psi [1BAR], (150 kPa) output all the way up to 750 psi [50 BAR] (5 MPa) output. This unit moves tremendous air volume, as its 1000 SCFM (1700 m3/HR) flow capacity is second to none. When you need fast response you can rely on the T1750 response time of less than 15 ms. The Model T1750 Transducers have a closed-loop, integrated, microprocessor control system that regulates outlet pressure. You can control the output from the Model T1750 using the keypad or from an analog control signal. The Feed and Bleed Solenoid Valves control pressure in the Signal Chamber of the Booster Section. A pressure sensor measures the outlet pressure and provides a feedback signal to the Electronics Section. Any variation in pressure between the setpoint and the outlet pressure activates the Feed and Bleed Solenoid Valves to change the output pressure.
    Read more
  • M63N NRO175 compliant filter regulator

    Placeholder
    New Fairchild model 63N NACE NRO175 compliant filter regulator is a service regulator for severe service conditions for sulfide stress crack resistant materials for oil field and associated equipment. This model offers an integral 5-micron filter within its drip well bowl and offers the highest flow capacity of any regulator in its class. In addition, the Model 63N NACE features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain the desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63N NACE will handle 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa and up to 25 SCFM, 42.5 m3/hr flow capacity. This model also has a Canadian Registration (CRN) for all territories and provinces.
    Read more
  • Model 2000 – 40 SCFM [68 m3/Hr] Forward/Exhaust Flow No Bleed Volume Booster (M2000)

    The Model 2000 Pneumatic Volume Booster converts a low flow signal to a high flow output. It is ideally suited for a variety of applications including the operation of air systems that require rapid valve or cylinder action. With its balanced supply valve and aspirator tube, the M2000 booster will maintain setpoint while delivering a strong boost of volume. In addition, its no bleed soft seat design minimizes air consumption of the system. As a pilot operated regulator design, the M2000 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure. The M2000 provides a flow capacity of 40 SCFM (68 m3/HR), which results in a Cv factor of just less than 1.0 in forward flow mode.
    Read more
  • Model 63N NACE Pneumatic Filter Regulator (M63N)

    New Fairchild model 63N NACE MRO175 compliant filter regulator is a service regulator for severe service conditions for sulfide stress crack resistant materials for oil field and associated equipment. This model offers an integral 5 micron filter within its drip well bowl and offers the highest flow capacity of any regulator in its class. In addition, the Model 63N NACE features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63N NACE will handle 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa and up to 25 SCFM, 42.5 m3/hr flow capacity. This model also has Canadian Registration (CRN) for all territories and provinces.
    Read more
  • Precision Stainless Steel Fuel Control Regulator (M67)

    The directly-controlled Model 67 stainless steel regulator precisely controls fuel pressures in ranges from minus 6 to 60 psi. The large diaphragm actuator with directlycontrolled valve gives excellent response characteristics with very low hysteresis. High precision control is achieved by its forcebalanced valve, with a newly developed patented smooth running seal system. Specially developed for the high precision and reliability requirements of modern engine test equipment, the M67 is suitable for all fuels such as gasoline, diesel, biodiesel (RME), aviation fuel, methanol,ethanol, petrol mixtures E5 to E100 and diesel mixtures B5 to B100.
    Read more
  • Model 20 – 45 SCFM [76.5 m3/Hr] Forward/Exhaust Flow Volume Boosters (M20)

    The Model 20 Volume Booster is a smaller pneumatic device capable of high flow and exhaust capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the M20 handles up to 150 psig, [10.0 BAR], (1000 kPa) supply pressure and has ten available ratios to cover a wide range of applications. The M20 Booster provides a flow capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor of approximately 1.0 in forward mode. Typical Part Numbers are 20812, 20822, 20832, 20842, 20852, 20862, 20813, 20823, 20833, 20843, 20853, 20863
    Read more
  • Model 20BP Back Pressure Pneumatic Booster (M20BP)

    The Model 20BP is a smaller Back Pressure Pneumatic Booster designed for automated or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M20BP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 20BP Back Pressure Booster provides a flow capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor of approximately 1.0.
    Read more
  • Model 4500A – 150 SCFM [255 m3/Hr] Forward/Exhaust High Flow No Bleed Volume Boosters (M4500A)

    Fairchild's Model 4500 Pneumatic Volume Boosters are popular due to their rugged design and high flow capacity in an economical package. In its pilot operated regulator design, the M4500 handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and has five available signal to output ratios to meet most control element requirements. The 4500 Booster provides a flow capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor of approximately 3.0 in both forward and exhaust modes. 4514A, 4524A, 4534A, 4544A, 4554A, 4516A, 4526A, 4536A, 4546A, 4556A
    Read more
  • Model 4500ABP Back Pressure Pneumatic Booster (M4500ABP)

    Fairchild’s M4500ABP is a High Flow Back Pressure Booster designed for automated or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M4500ABP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 4500ABP Back Pressure Booster provides a flow capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor of approximately 3.0.
    Read more
  • Model 4800A – 500 SCFM [850 m3/HR] Forward/Exhaust High Flow No Bleed Volume Booster with Bypass Valve (M4800A)

    Fairchild’s M4800A is a High Flow Pneumatic Volume Booster specifically designed for Valve and valve actuation systems. With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response and accurate control for valve actuation. In addition, the M4800A has an integral bypass valve, for optimum tuning and adjustment, even while in operation, to obtain maximum performance on opening and closing times with minimal overshoot or oscillation. In its pilot operated regulator design, the M4800A handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4800A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.
    Read more
  • Model 4900A – 500 SCFM [850 m3/HR] Forward/Exhaust High Flow No Bleed Volume Booster (M4900A)

    Fairchild’s M4900A is a High Flow Pneumatic Volume Booster designed for high precision applications. With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response, very low deadband and high precision control. In its pilot operated regulator design, the M4900A handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4900A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.
    Read more
  • Model 200 – 1800 SCFM [3058 m3/Hr] Forward Ultra High Flow Volume Booster (M200)

    The Model 200 Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1 ratio. It is ideally suited for systems that require input isolation or increased forward flow capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the M200 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high Flow capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in forward flow mode.
    Read more
  • Model 200XLR – 1800 SCFM [3058 m3/Hr] Forward/Exhaust Ultra High Flow Volume Boosters (M200XLR)

    Based on the Model 200 valve body, the Model 200XLR Volume Booster couples two identical units to obtain ultra high flow capacity in both forward and exhaust modes. As a pilot operated regulator design, the M200 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in both forward and exhaust flow modes.
    Read more
  • Brackets, Gauges & Ball Valves (Modular Ball Valves and Accessories)

    Take full advantage of your compressed gas system by adding a modular ball shutoff valve. A ball shutoff valve is essential for quick turn around of maintenance and replacement of in-line system components. Save time and money onn the cost of repairs of system components with Fairchild's new modular ball valves. The lockout feature of Fairchild's new ball valves provide a sage and more fluid work environment. Fairchild's new modular ball shutoff valves are rugged with extreme high flow capacity and quality construction. Port sizes from 1/4" to 3/4" with flow capacities ranging from 42 SCFM to 678 SCFM. Also available are a full line of brackets and gauge accessories to complete your air preparation package.
    Read more
  • Particulate Filters (F Series)

    Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new Particulate Filters provide the clean, dry, lubricated air essential for optimum performance of pneumatic systems. With their modular construction, the particulate filters provides compact efficiency, high flow, and superior 5 micron filtration.
    Read more
  • Filter Regulator (FR)

    Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new FR preparation package provides the clean, dry air essential for optimum performance of pneumatic systems. With their modular construction, the FR unit provides compact efficiency, high flow, and superior 5 micron filtration. Output pressures up to 125 psig and flow to 175 SCFM.
    Read more
  • Coalescing Filters (D Series)

    Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild's new Coalescing Filters provide the clean, dry, lubricated air essential for optimum performance of pneumatic systems. With their modular construction, the coalescing filters provides compact efficiency, high flow, and superior 0.5, 0.01, or 0.003 micron filtration.
    Read more
  • Automatic Drain Filters

    The Fairchild Automatic Drain Filter Series is designed for use in systems that require clean, oil-free air. This series consists of a particulate filter and two coalescing filters with automatic drains. You can easily replace all filter elements. Automatic Drain Filters are highly effective in removing oil and liquid-borne particulate matter. These units are recommended for use when clean air or inert gas environments are required in laboratory air, process control, instrument and compressed air systems.
    Read more
  • Mini Strip and Round Pressure Gages

    Mini Strip Gages are designed for use in small panel mount applications. Both gage styles include a receiver gage configuration designed for the pneumatic transmission of process variables.
    Read more
  • Mini-Panel Loading Stations

    Models MPL-70 and MPLT-70 Mini-panel Loading Stations transmit and monitor a pressure signal for pneumatic instrumentation. These loading stations are ideally suited for applications with limited space. The Model MPL-70 includes a Model 70B Pneumatic Subminiature Regulator and a mini-strip gage to set and read pressure at the panel. The MPLT-70, with the Transfer Function, includes a Model 70B Pneumatic Subminiature Regulator, an automatic or manual switch, and an additional mini-strip gage to monitor the process in automatic mode or change pressure settings in manual mode. Turn the adjusting knob in the loading station panel in a clockwise direction to increase output pressure or in a counterclockwise direction to decrease output pressure.
    Read more
  • Panel Loading Station

    Models PL-5 and PLT-8 Panel Loading Stations maintain and monitor output pressure for pneumatic instrumentation. The PL-5 includes a regulator (Model 10, Model 30, Model 64/65A, or Model 81) and a standard pressure gage that allows operator to set and read pressure at the panel. The PLT-8 includes a regulator (Model 10, Model 30, or Model 64A/65A) and a three-way valve that allows operator to monitor the process in manual or automatic mode. In manual mode, operator can set and read the pressure at the panel. In automatic mode, operator can set the pressure from a remote location and read the pressure at the panel.
    Read more
  • Rack Kits for T6000, T7800 and T8000 Transducers

    All T6000, T7800 and T8000 Rack Kits utilize a 10 unit manifold described in the above manifold kits. The rack kit includes additional hardware to permit installation in a standard 19" Rack. It is suggested that transducers used with rack kits include the "R" option. This option faces the electrical terminal block connector to the rear of the transducer permitting connections to the transducer to be made from the rear of the rack.
    Read more