Shop

Showing 49–72 of 88 results

  • Fast Response E/P, I/P Pressure Transducers (T5200)

    Fast Response E/P, I/P Pressure Transducers (T5200)
    Rotork Fairchild's T5200 Transducer is a Fast Response I/P, E/P Transducer controlled by a 4-20 mA current in a control loop. With its reliable signal conversion and pneumatic circuit sections, the T5200 I/P Transducer provides fast response to input signal changes, resulting in faster loop control and savings in process materials. The Signal Conversion Section (PC Board) accepts a 4-20 mA current from the control loop. This signal current is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force of the Flexure Arm.Its minimal air consumption allows you to use the T5200 in systems where operating gas is expensive. Five available input signal ranges deliver the versatility to meet most process and machine requirements. These available inputs are 1-5 mA, 4-20 mA, 10-50 mA, 1-5 VDC and 1-9 VDC, each with the corresponding output range of 3-15 psig, [0.2-1.0 BAR], (20-100 kPa).
    Read more
  • Fast Response High Flow E/P, I/P Pressure Transducers (T5220)

    Fast Response High Flow E/P, I/P Pressure Transducers (T5220)
    As a Fast Response High Flow I/P, E/P Transducer, the Fairchild T5220 has all the performance you want in a voice coil I/P transducer product, but it also includes a built in booster section to deliver high flow capacity, up to 45 SCFM (76.5 m3/HR) with six available rations to allow pressure multiplication to the output. This feature, along with the adjustable positive and negative bias allows you to custom design your control system for exactly the desired performance. The Signal Conversion Section (PC Board) accepts a DC current or voltage. This signal is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force transferred to the Flexure Arm by the Coil. The Booster Section amplifies the output pressure of the transducer.
    Read more
  • Adjustable Ratio, E/P, I/P Pressure Transducer (T5221)

    When your application requires a very specific control system, look to the T5221 Adjustable Ratio I/P, E/P Transducer. The T5221 Transducer is an electro-pneumatic device that converts a DC current or voltage input signal to a proportional output pressure. This device is made up of four sections, the Signal Conversion Section, the Pneumatic Section, the Ratio Section, and the Booster Section. The Fairchild T5221 I/P transducer has all the response and flow performance features of the T5200 series, with the addition of an Adjustable Gain from the ratio section, which allows this single device to cover most industrial and process control requirements. The output pressure is a function of signal pressure times the ratio of lever arm lengths on either side of the Pivot.
    Read more
  • Digital Pressure Transducer (T5400)

    The T5400 Transducer is a digital-pneumatic device that provides a pneumatic output signal controlled by 8 bit digital data instructions from a central control room, a remote control location, or a local control station. This device is made up of two sections, the Signal Conversion Section and the Pneumatic Section. The Signal Conversion Section (PC Board) accepts an 8 bit parallel wired digital signal. Full scale output is divided into 255 parts and the output level is based on the logic state (high or low) of the 8 bits. An enable line allows the unit to accept information from a parallel bus. The digital input signal is converted to an analog signal. The signal is then applied to the actuation mechanism. The Fairchild T5400 Fail Safe High or Low will return the output to 3 psig for Direct Acting Mode or to 15 psig for Reverse Acting Mode if the power is lost, regardless of the logic selected.
    Read more
  • Digital High Flow E/P, I/P Pressure Transducer (T5420)

    The T5420 is a Digital-Pneumatic Transducer, compatible with most digital systems using TTL and CMOS Logic. Its Fail safe High or Low will return the field reversible output to 3 psig for Direct Acting Mode or to 15 psig for Reverse Acting Mode if the power is lost, regardless of the logic selected. The Integral Volume Booster Output of the T5420 provides a flow capacity of 45 SCFM (76.5 m3/HR), to meet input requirements of final control elements requiring a higher capability output signal, increased output pressure, and/or increased flows.
    Read more
  • High Flow E/P, I/P Pressure Transducers (T5700)

    Fairchild's Model T5700 is an electro-pneumatic transducer that converts a current signal to a linear pneumatic output, using a force balance system with a flapper and the nozzle to control the pressure in the intermediate housing. Its low droop under flow conditions allows improved control of downstream pressure. Additionally, the T5700 has high flow and is virtually immune to supply pressure change, which permits use of normal plant air. The T5700's minimal air use in dead end service (.05 SCFM) dramatically reduces air consumption.
    Read more
  • Compact E/P, I/P Pressure Transducers (T6000)

    The T6000 compact size E/P, I/P pressure transducer is a field reversible unit that provides an output directly or inversely proportional to the input signal. Its six available output pressure ranges and six available input signal ranges meet most process and machine requirements. The T6000 Series is designed for precision applications providing maximum versatility. The modular construction permits any basic unit to be used in the explosion-proof, rack, wall, pipe, panel, DIN rail or 3, 5, 10, or 15 unit manifold configurations and servicing or calibration is quick and easy. An extended range T6000 I/P Transducer is also available, which provides output pressure capability up to 0-120 psi [0-8.0 BAR], (0-800 kPa). The Extended Unit is made up of three sections, the Primary Control Section, the Pneumatic Relay Section, and an additional Pneumatic Relay Section. The additional Relay Section is used to amplify the output pressure.
    Read more
  • Filter Service Regulators (M63)

    The Fairchild Model 63 filter regulator is a general purpose service regulator with an integral 5 micron filter within its dripwell bowl. In most applications, a pneumatic filter regulator must provide good filtration and high flow to serve the needs of the system without restricting its performance. The Model 63 pressure regulator is well suited to these applications as it has a standard 5 micron filter and has the highest flow capacity of any regulator in its class. In addition, the Model 63 features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 63 will handle a 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa. The Fairchild Model 63 pressure regulator offers up to 25 SCFM, 42.5 m3/hr flow capacity.
    Read more
  • Service Regulator (M64)

    The Fairchild Model 64 service regulator is a general purpose regulator (does not have a filter). The Model 64 service regulator has wider port to port mounting dimensions (3.15", 80 mm) making it the choice for field replacement of older style Fairchild and competitive service regulators that have wider mounting port spacing. The Model 64 pneumatic regulator is similarly well suited to general purpose service regulator applications as it has the highest flow capacity of any regulator in its class. In addition, the Model 64 features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 64 will handle a 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa. The Fairchild Model 64 pressure regulator offers up to 25 SCFM, 42.5 m3/hr flow capacity.
    Read more
  • Filter Service Regulators (M65)

    The Fairchild Model 65 filter service pressure regulator is a general purpose service regulator with an integral 5 micron filter within its dripwell bowl. In most applications, a filter regulator must provide good filtration and high flow to serve the needs of the system without restricting its performance. The Model 65 service regulator has wider port to port mounting dimensions (3.15", 80 mm) making it the proper choice for field replacement of older style Fairchild and competitive service regulators that have wider mounting port spacing. The Model 65 is well suited to these applications as it has a standard 5 micron filter and has the highest flow capacity of any regulator in its class. In addition, the Model 65 filter service regulator features control sensitivity of 1" water column and an integral relief valve to deliver consistent and reliable performance to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 65 pneumatic regulator will handle a 300 psi, 20 BAR, maximum supply pressure and offers three (3) output pressure ranges from 0.5-30 psi, 0.03-2 BAR, 3-200 kPa, up to 2-120 psi, 0.14-8 BAR, 14-800 kPa. The Fairchild Model 65 pressure regulator offers up to 25 SCFM, 42.5 m3/hr flow capacity.
    Read more
  • Pneumatic Stainless Steel Service Regulator (M66)

    Back Pressure Regulators
    The Fairchild Model 66 is a stainless steel pressure regulator for high performance applications with corrosive environments and/or high temperatures. The Model 66 Stainless steel housing and internals, along with its fluorocarbon elastomers are compatible with a wide range of corrosive materials and difficult operating environments. The Fairchild Model 66 pneumatic regulator features control sensitivity of 1" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of system pressure changes or conditions. The Fairchild Model 66 pressure regulator will handle a 500 psi, 35 BAR maximum supply pressure and offers five (5) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa.
    Read more
  • Motorized Pressure Regulator (MP2400)

    The 24CC, 24CS, 24XC and 24XS M/P Converters are motor driven pneumatic regulators with motor assemblies enclosed in a commercial enclosure, typically used as automation regulators. The AC Control Unit for the 24CC unit is a continuous operation motor available in 115vAC. The control assembly for the 24CS unit is a stepper motor with an integral Translator Board which converts 23-26vDC digital pulse inputs supplied by the customer, into control logic to drive the motor. The AC Control unit for the 24XC unit is a continuous operation motor available in 115vAC. A feedback potentiometer option is available for these units. The DC pulse input assembly for the 24 XS unit is a Clock Generator/Translator board available for the 12vDC or 24vDC pulse input. This allows the use of an external Controller with a 12vDC or 24vDC output. The DC analog input assembly is an Amplifier (Proportional Control) and Translator board which allows operation with a 4-20mA or 1-5vDC analog input. Minimum-maximum limit switches are standard on this unit. Reverse action and split ranging on the analog unit can be achieved in the field. The explosion proof motor and housing is coupled to a pneumatic regulator assembly to provide the desired operating pressure range for any application. The Fairchild MP2400 motorized regulator line will handle a 500 psi, 35 BAR maximum supply pressure and offers eleven (11) different set point pressure ranges from Vacuum-10 psi, vacuum-0.7 BAR, vacuum-70 kPa up to 2-100 psi, 0.15-7 BAR, 15-700 kPa.
    Read more
  • Low Pressure Motorized Pressure Regulator (MP2400)

    The Model 2400 M/P Low Pressure Converter is also a motorized regulator, however, this unit uses a larger diaphragm regulator as its pressure control device to facilitate high accuracy set point control. The pneumatic control circuit is isolated from any explosive environment by enclosing the motor and associated electronics an explosion-proof housing. The Stepper Motor configuration is equipped with a clock generator positioned horizontally, which plugs into a vertically mounted translator board. The configuration includes limit switches. The Stepper Motor is mounted on the bottom of the motor assembly in the base of the explosion-proof housing. Wiring to the unit is made to a terminal board through a 1/2" - 14 NPT conduit fitting in the base of the housing. The large diaphragm regulator attaches to the motor housing and provides precision control in three (3) available pressure ranges, from 0-20 in water column, up to 0-5 psi. In these configurations, the MP2400Low Pressure motorized regulator will handle a supply pressure up to 150 psi, 10BAR, 1000 kPa.
    Read more
  • Plunger Operated Pressure Regulator (M2800)

    The Fairchild Model 2800 Plunger Regulator is designed for applications requiring linear mechanical actuation of set pressure. This precision device provides excellent sensitivity with high forward and reverse flows. The plunger design allows more rapid set point adjustment over the pressure range of the unit than conventional control knob models. The Model 2800 pneumatic plunger regulator is recommended for use in a variety of applications where mechanical actuation is required, including control stations and test panels, and in construction machinery and industrial or oil rig control equipment. The Fairchild Model 2800 features control sensitivity of 0.5" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of system pressure changes or conditions. The Model 2800 pressure regulator will handle a 250 psi, 17 BAR maximum supply pressure and offers four (4) set point pressure ranges from 0.5-10 psi, 0.03-0.7 BAR, 3-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa.
    Read more
  • Lever Operated Pressure Regulator (M3400)

    The Fairchild Model 3400 Lever Operated pressure Regulator is designed to allow rapid changes in pressure settings at control stations and test panels. This high quality unit, capable of handling high flows and exhausts combines positive control with good sensitivity. The Model 3400 Pneumatic Lever Operated Regulator is the combination of a Model 1000 High Flow Pressure Regulator and a hand held operated lever mechanism with 120 degree maximum travel. The Model 3400, offered in four (4) different pressure ranges, is recommended for use in systems requiring the execution of hand operated pressure control such as the control of a throttle in an engine or engine room. The regulator is the logical choice for rapid, "hands on" control in a variety of applications, including construction machinery, industrial and oil rig equipment, and cylinder operation.
    Read more
  • Motorized High Pressure Regulator (24XFM)

    The 24XFM M/P Converter is a Motor Driven Pneumatic Regulator with motor assembly enclosed in a explosion proof housing. The motor is coupled to a no-bleed Model 10 pneumatic regulator assembly to provide the desired operating pressure range for any application. The 24XFM requires a 12-24 VDC power supply and has the option of DC Pulse or DC Analog input. The Fairchild 24XFM motorized regulator line will handle a 500 psi, 35 BAR maximum supply pressure and offers four (4) different set point pressure ranges from 0-30 psig [0-2 bar], to 0-150 psig [0-10 bar].
    Read more
  • PAX1 Electric Linear Actuator

    Rotork Fairchild's all new PAX1 Series Linear Actuator can be used alone or it can be paired with a variety of Fairchild time proven pressure regulators, enabling remote control of the pneumatic pressure. Power is provided by 11-26 VDC and position is controlled by a 4-20mA signal or pulse clockwise or counterclockwise. The actuator is designed to lock in last place if power or signal are lost. The PAX1 is ideal when precise position control is required, and it has an optional analog feedback that transmits current position to the operator through an 4 to 20 mA Analog Feedback Signal. Adjustable motor speeds, customer set position limits and alarms are standard features.
    • The PAX 1is available in a variety of configurations and NAMUR mounting interface allow it to be flexible for use as an industrial actuator, featuring a 1" (25 mm) maximum thrust rod stroke moving at speeds up to 60 mm/min and a maximum thrust of 650 lbf (2,890 N), all in a flameproof enclosure. The unit in inherently lock in last place (fail freeze) as the thrust rod maintains its position upon loss of signal or electrical power.
    • The PAX1 can be actuated open loop using two optically isolated switch closure inputs (UP and Down) to move the actuator's thrust rod. The actuator will continue the move of the thrust rod in response to the inputs until either either of the adjustable stroke limits are reached.
    • The PAX 1 also has an isolated 4-20 mA analog input to proportionally position the thrust rod anywhere within its 1" (25 mm) stroke. Optionally, a 1-5 VDC non-isolated analog input can be selected by an internal DIP switch.
    • The actuator also includes two fully adjustable SPDT alarm relays (one High and one Low), providing critical positions within its stroke. The relays are latched so the alarm switch states are maintained when the power is disconnected.
    • The actuator also features UP and DOWN buttons and a 5/16" (8 mm) female HEX socket to allow manual actuator movement, in order to facilitate commissioning.
    All these features are allows accurate control and alarm functions on systems that remove power from the actuator between adjustments to conserve power, as typically done in solar powered installations.
    Read more
  • Vacuum/Positive Pressure Regulator (M16)

    The Fairchild Model 16 Vacuum Regulator is designed for systems that require system pressure control above and below atmospheric pressure. Stability of regulated vacuum or pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the inner valve in accordance with the flow velocity. The Model 16 pneumatic vacuum regulator features control sensitivity of 1/2" water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure/vacuum changes or conditions. The Fairchild Model 16 will handle a 250 psi, 17 BAR, maximum supply pressure and offers five (5) output pressure ranges from Vacuum-2 psi, Vacuum-0.15 BAR, Vacuum-15 kPa, up to Vacuum-150 psi, Vacuum-10 BAR, Vacuum-1000 kPa. The Fairchild Model 16 pressure regulator offers up to 40 SCFM, 65 m3/hr positive flow capacity.
    Read more
  • Vacuum Regulator (M17)

    The Fairchild Model 17 Vacuum Regulator is designed for systems that require system vacuum control up to full vacuum. The Model 17 control diaphragm is balanced by a set of three range springs to provide the most stable, responsive and reliable operation. Stability of regulated vacuum or pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the inner valve in accordance with the flow velocity. The Model 17 pneumatic vacuum regulator features control sensitivity of 1/2" water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. In fact, it will deliver this performance with a vacuum supply effect of less than 0.15 of any change in supply vacuum. The Fairchild Model 17 will handle a 40 in Hg, 762 Torr, 102 kPa maximum supply vacuum and offers three (3) output vacuum ranges from 0-5 in Hg, 0-127 Torr, 0-17 kPa, up to 0-30 in Hg, 0-762 Torr, 0-102 kPa. The Fairchild Model 17 pneumatic vacuum regulator offers up to 12 SCFM, 20.4 m3/hr flow capacity.
    Read more
  • High Flow Vacuum Regulator (M1600A)

    The Rotork Fairchild Model 1600 Vacuum Regulator is designed for systems that require high flow and system pressure control above and below atmospheric pressure. Stability of regulated vacuum or pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the inner valve in accordance with the flow velocity. The Model 1600 precision vacuum regulator features control sensitivity of 1" water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure/vacuum changes or conditions. The Fairchild Model 1600A will handle a 250 psi, 17 BAR, maximum supply pressure and offers three (3) output pressure ranges from Vacuum-10 psi, Vacuum-0.7 BAR, Vacuum-70 kPa, up to Vacuum-150 psi, Vacuum-10 BAR, Vacuum-1000 kPa. The Fairchild Model 1600A pressure regulator offers up to 28 SCFM, 48 m3/hr vacuum flow capacity.
    Read more
  • Vacuum Relief Regulator (M18)

    The Fairchild Model 18 Vacuum Relief Regulator is designed for systems that require system vacuum control up to full vacuum. The Model 18 Vacuum Relief Valve uses a force balance principle to open the relief valve and allow atmospheric air to lower vacuum levels when the set point is exceeded. Stability of regulated vacuum or pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the inner valve in accordance with the flow velocity. The Model 18 pneumatic vacuum relief regulator features control sensitivity of less than 1/8" water column and a balanced supply valve to deliver consistent and reliable accuracy. The Fairchild Model 18 will handle a 30 in Hg, 762 Torr, 102 kPa maximum supply vacuum and offers three (3) relief vacuum ranges from 4 in Hg, 140 mBar, 14 kPa, up to 30 in Hg, 1000 mBar, 100 kPa. The Fairchild Model 18 pneumatic vacuum relief regulator offers up to 8 SCFM, 68 m3/hr flow capacity.
    Read more
  • Subminiature Pressure Regulator (M70)

    The Fairchild Model 70 precision pressure regulator controls a pressure signal for pneumatic instrumentation applications. This miniature regulator is ideally suited for applications with limited space. In addition, its brass bonnet and valve body makes the M70 an excellent choice for use in sensitive applications. The Model 70 pneumatic regulator also has an integral vibration damper to provide low noise operation. The Fairchild Model 70 features control sensitivity of 2.5" water column and a supply pressure effect of less than 1% to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Model 70 brass pressure regulator will handle a 250 psi, 17 BAR maximum supply pressure and offers five (5) set point pressure ranges from 0-5 psi, 0-3.5 BAR, 0-35 kPa up to 2-100 psi, 0.1-7 BAR, 15-700 kPa. 70220, 70230, 70240, 70250
    Read more
  • High Performance Miniature Pressure Regulator (M72)

    The Fairchild Model 72 high performance miniature regulator has a slightly larger footprint than the Model 70, which in conjunction with its over molded pintle valve, provides highly responsive, yet extremely stable operation. The Aluminum bonnet and valve body of the Model 72 makes it a light weight and versatile product. The Fairchild Model 72 pneumatic regulator features control sensitivity of 2" water column and a supply pressure effect of less than 0.5% to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Model 72 pressure regulator will handle a 250 psi, 17 BAR maximum supply pressure and offers five (5) set point pressure ranges from 0-5 psi, 0-3.5 BAR, 0-35 kPa up to 2-100 psi, 0.1-7 BAR, 15-700 kPa.
    Read more
  • Miniature Pressure Regulator (M55)

    The Fairchild Model 55 is a compact precision polymer pressure regulator for high performance applications where space or weight may be limited or material compatibility concerns dictate use of a polymer construction regulator. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the supply valve in accordance with the flow velocity. The Model 55 pneumatic regulator features control sensitivity of 5" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 50 pressure regulator will handle a 150 psi, 10 BAR maximum supply pressure and offers four (4) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-100 psi, 0.1-7 BAR, 15-700 kPa.
    Read more